원문 : http://www.ischo.net -- 조인상 // 시스템 엔지니어

Writer : http://www.ischo.net -- ischo // System Engineer in Replubic Of Korea

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

 

원문 : http://www.ischo.net -- 조인상 //시스템 엔지니어

출처 : http://www.ibm.com/developerworks/aix/library/au-aixoptimization-memtun3/index.html#N100CF

           IBM 홈페이지
+++++++++++++++++++++++++++++++++++++++++++++++++++++++

Optimizing AIX 5L performance: Tuning your memory settings, Part 3

 

About this series

This three-part series focuses on the various aspects of memory management and tuning on IBM System p™ servers running AIX®. Part 1 provides an overview of memory on AIX, including a discussion of virtual memory and the Virtual Memory Manager (VMM). It also drills down into the tuning parameters and outlines recent improvements in AIX Version 5.3 with respect to memory management. Part 2 focuses on the detail of actual memory subsystem monitoring and discusses how to analyze the results. Part 3 focuses specifically on swap space and how best to tune your VMM settings to provide for optimum swap space configuration and performance.

Introduction

Just what is swap (paging) space? It all starts with the VMM. VMM uses swap space (paging) as a holding bin for a process that is not using active RAM. Because of its purpose, it is a critical component of overall system performance. As an administrator, you need to know how to monitor and tune your paging parameters. The paging space itself is a special logical volume that stores the information that is currently not accessed. You must make sure that your system has adequate paging space. If the paging space is too low, entire processes can be lost and the system can crash when your space fills up. Though it is important to reiterate that paging is a normal part of VMM, it is even more important you really understand how the kernel brings the process into RAM—too much paging definitely hinders performance. AIX, through tight integration of the kernel and VMM, makes use of a methodology called demand paging. In fact, most of the kernel itself resides in virtual memory, which helps free up segments for other processes. I'll dig deeper into how this works and discuss some of the tools you need to use to manage and tune your paging space.

You will find that the tuning you do is based on what type of system you have. For example, systems that are using an Oracle Online Transaction Processing (OLTP) type of database usually have specific recommendations on how much swap space to configure and how to tune the paging parameters. As discussed in previous installments of the series (see Resources), you cannot really tune your paging settings unless you really know what is going on in the host system. You need to understand the tools to use, how best to analyze the data that you will be capturing, and familiarize yourself with best practices for implementing your paging space. It has been my experience that the number one cause for a system crash is running out of paging space. If you read this article carefully and follow its recommendations, this should never happen to you. Obviously, you never want your system to crash but, if it does, you want it to be due to a hardware failure and nothing that you did or forgot to do as the systems administrator.

Demand paging

In this section, I provide an overview of how AIX handles paging, define swapping and paging, and drill down into the different modes of paging space allocation. These concepts help you understand subsequent sections on monitoring, configuring, and tuning.

Most administrators think of paging as something that is onerous. Paging is actually a very normal part of what AIX does, due to the tight integration of its kernel with the VMM and its implementation of demand paging. The way demand paging works is that the kernel only loads a few pages at a time into real memory. When the CPU is ready for another page, it looks at the RAM. If it cannot find it there, a page fault occurs, and this signals the kernel to bring more pages into RAM from disk. One advantage of demand paging is that the paging space does not have to be particularly large, because data is constantly being shuffled between paging space and RAM. On older UNIX® systems, paging was preallocated to disks, whether they were used or not. This caused a condition where disk space would be allocated that was never used. Demand paging, in essence, avoids the condition where this disk space is allocated for no purpose. Swapping of processes is kept to a minimum, because many more jobs can be stored in RAM. This is true, because only parts of processes (pages) are stored in RAM.

What about swapping? Though often used interchangeably, there is a subtle difference between paging and swapping. As discussed, only parts of the process are moved back and forth between disk and RAM with paging. When swapping occurs, you are moving entire processes back and forth. For this to happen, AIX suspends the entire process prior to moving it to paging space. It could then only continue to process when it is swapped back into RAM at a later event. This is not good and you should do everything you can to prevent swapping from occurring, which can cause another condition called thrashing (I'll get into this more later).

As a UNIX administrator, you are probably already aware of some of the concepts of paging and swapping. AIX provides three different modes of paging space allocation: deferred page space allocation, late page space allocation, and early page space allocation. The default policy of AIX is deferred page space allocation. This works by making sure that the allocation of paging space is delayed until the time that it is necessary to page out the page, which ensures that there is no wasted paging space. In fact, when you have a large amount of RAM, you might actually never even use any of your paging space (see Listing 1).


Listing 1. Ensuring that there is no wasted paging space
                
# lsps -a

Page Space      Physical Volume   Volume Group    Size %Used Active  Auto  Type
hd6             hdisk0            rootvg        4096MB     1     yes   yes lv   

Only one percent of paging space is used in Listing 1.

Let's view how AIX is currently handling paging space allocation (see Listing 2).


Listing 2. Checking how AIX is handling paging space allocation
                
# vmo -a | grep def
  defps = 1

Listing 2 illustrates that the default method, deferred page space allocation, is being used. To disable this policy, you need to set the parameter to 0. This activates the system to use the late paging space allocation policy. Late paging space allocation causes paging disk blocks not to be allocated until its corresponding pages in RAM are touched. This method is usually intended for environments where optimum performance is more important than reliability. In the scenario presented here, a program can fail due to the lack of memory. What about early page space allocation? This policy is usually used if you want to make certain that processes will not be killed because of low paging conditions. Early page space allocation preallocates paging space. This is the opposite end of the spectrum from late paging space allocation. It is used in environments where reliability rules. The way to turn this on would be to set the PSALLOC environment variable to early (PSALLOC=early).

You should also be aware of the garbage collection feature first introduced in AIX Version 5.3. This allows you to free up paging-space disk blocks, which allows you to configure less paging space than you would ordinarily need. This feature is only available for the default deferred page space allocation policy.

Monitoring and configuring paging space

In this section, I'll show you how to monitor the paging space on your system. I'll also discuss the various commands used for configuring paging space and other tools that help you work with paging space as a systems administrator.

The simplest way of determining the amount of paging space used on your system is by running the lsps command (see Listing 3).


Listing 3. Running the lsps command
                
# lsps -s
Total Paging Space   Percent Used
      4096MB               1%

You looked earlier at the -a flag. I prefer using the -s flag, because the -a flag shows only paging space that is being used while the -s command gives you a summary of all paging space allocated, including space allocated using early page space allocation. Of course, this only applies if the default method of paging allocation was turned off.

Next on the plate is vmstat. Part 2 of this series discussed vmstat in great detail, which is one of my favorite VMM monitoring tools. I find that it is the quickest way to determine what is going on in your system. If there is a lot of paging and thrashing going on, you will find it here.

Let's look at some output shown in Listing 4.


Listing 4. Using vmstat
                
# vmstat 1 5

System Configuration: lcpu=2 mem=4096MB
kthr     memory             page              faults        cpu
----- ----------- ------------------------ ------------ -----------
r  b   avm   fre  re   pi  po  fr   sr    cy    in   sy  cs  us sy id wa
1  0 166512  627    0   0   1  0   92    0 277  3260 278   3  1  96  0
1  0 166512  623    0   0   1  0   40    0 253  2260 108   2  1  96  1
1  0 166512  627    0   0   0  0   0     0 248  3343  91   0  1  96  2
1  0 166512  627    0   0   0  0   2     0 247  3164  84   0  1  99  0
1  0 166512  627    0   1   0  0   0     0 277  3260  83   2  1  97  0

The columns most meaningful for your purposes here are:

  • avm —This column represents the amount of active virtual memory (in 4k pages) you are using, not including file pages.
  • fre —This column represents the size of your memory free list. In most cases, I don't worry when this is small, as AIX loves using every last drop of memory and does not return it as fast as you might like. This setting is determined by the minfree parameter of the vmo command. At the end of the day, the paging information is more important.
  • pi —This column represents the pages paged in from the paging space.
  • po —This column represents the pages paged out to the paging space.
  • As you can see in Listing 4, there is essentially no paging going on in the system.

    Listing 5 shows an example of a system that is probably thrashing.


    Listing 5. Possible thrashing system
                    
    # vmstat 2 3
    
    System Configuration: lcpu=4 mem=4096MB
    kthr     memory             page              faults        cpu
    ----- ----------- ------------------------ ------------ -----------
    r  b   avm   fre  re   pi  po  fr   sr    cy    in   sy  cs  us sy id wa
    1  2 166512  7    0    57 127  0   929    0 2779 3260 1278 3 30  50  0 20
    1  5 166512  12   0    39 129  0   409    0 2538 2260 1108 2 10  30 10 50
    1  6 166512  110  0     8 212  0   480    0 2487 3343 991  0 27  33 20 30
    

    How can you tell this? First of all, look at the po column. This signifies that pages are consistently being moved back and forth between disk and RAM. You should also see a bottleneck on your system, as the blocked processes and wait times are abnormally high. The freelist is also lower than it should be. In looking at the freelist with the vmo command, you determined that the number was 120. This means that this number should not be falling below the 120 mark. Ordinarily, I would say it is not a problem when your freelist is low but, in this case, it is below where it should be. When this occurs, it usually signifies that thrashing is going on in your system. A classic sign of thrashing is when the operating system attempts to release resources by first warning processes to release paging space and then killing entire processes. In tuning vmo parameters, you can help set the thresholds when thrashing starts. You can also look at memory usage with either topas or nmon. Both of these utilities graphically display the paging in a more user-friendly format (see Listing 6).


    Listing 6. Paging displayed graphically using topas
                    
    Topas Monitor for host:    testbox               EVENTS/QUEUES    FILE/TTY
    Sun May 20 11:48:42 2007   Interval:  2         Cswitch      86  Readch    90043
                                                    Syscall    1173  Writech    1336
    Kernel    0.5   |#                           |  Reads       103  Rawin         1
    User      0.0   |                            |  Writes       91  Ttyout      157
    Wait      0.0   |                            |  Forks         0  Igets         0
    Idle     99.5   |############################|  Execs         0  Namei       147
                                                    Runqueue    0.0  Dirblk        0
    Network  KBPS   I-Pack  O-Pack   KB-In  KB-Out  Waitqueue   0.0
    en1       1.6      4.0     4.0     0.2     1.4
    en2       0.0      0.0     0.0     0.0     0.0  PAGING           MEMORY
    lo0       0.0      0.0     0.0     0.0     0.0  Faults        0  Real,MB    4095
                                                    Steals        0  % Comp     16.6
    Disk    Busy%     KBPS     TPS KB-Read KB-Writ  PgspIn        0  % Noncomp  84.3
    hdisk0    0.0      0.0     0.0     0.0     0.0  PgspOut       0  % Client    0.5
    hdisk1    0.0      0.0     0.0     0.0     0.0  PageIn        0
    hdisk3    0.0      0.0     0.0     0.0     0.0  PageOut       0  PAGING SPACE
                                                    Sios          0  Size,MB    4096
    Name            PID  CPU%  PgSp Owner                            % Used      0.5
    topas        156220   0.2   2.5 root            NFS (calls/sec)  % Free     99.4
    sldf          96772   0.2   0.2 rds             ServerV2       0
    syncd         12458   0.0   0.6 root            ClientV2       0   Press:
    lrud           9030   0.0   0.0 root            ServerV3       0   "h" for help
    gil           10320   0.0   0.1 root            ClientV3       0   "q" to quit
    

    The PAGING column (shown in bold in Listing 6) shows that there is no paging going on at all.

    What about maintaining the size of your paging space? You do this with the swap command (see Listing 7) in AIX.


    Listing 7. Using the swap command
                    
    # swap -l
    device              maj,min     total       free
    /dev/hd6            10,  2      4096MB      4093MB
    

    This tells you that you have one swap partition defined. You'll also notice that only 3MB are actually being used. Listing 8 shows what happens if your paging space utilization is too high.


    Listing 8. Running out of paging space
                    
    # lsps -a
    
    Page Space      Physical Volume   Volume Group    Size %Used Active  Auto  Type
    hd6             hdisk0            rootvg        4096MB    78    yes   yes   lv   
    

    In this case, your paging space is starting to get dangerously low. It is possible that your system has been up for a very long time. If you are running a database such as Oracle, virtual memory does not get released until you recycle your database. Let's see how long your system has been up (see Listing 9).


    Listing 9. Using the uptime command
                    
    # uptime
      11:58AM   up 9 days,  15:50,  23 users,  load average: 0.00, 0.03, 0.04
    

    As shown in Listing 9, the system has been up for only nine days. If the paging space utilization has increased to 78 percent in such a short amount of time, you should consider adding more paging space. If you have plenty of space on your system, I would add another partition.

    One best practice to keep in mind is to keep your paging spaces at the same size. In this case, I would add another 4GB of paging space to your rootvg volume. You can do this with the System Management Interface Tool (SMIT) and use either the smit mkps and smit swapon commands to activate the paging space. Alternatively, you can use the swapon (including swapoff) commands from the command line. If you can, use disks that are least used for paging areas. Also try not to allocate more than one paging logical volume for each physical disk. Though some administrators don't mind putting paging space on external storage, I personally don't like that practice. If you do this and the external storage is not available on a reboot, your system might crash (depending upon the amount of space allocated to paging). If you can, spread them across multiple platters and, of course, make sure they are online by using the lsps -a command.

    How much paging space do you need on your system? What is the rule of thumb? First, start with the folks that own your application. The DB2® or Oracle teams should be able to tell you how much paging space needs to be allocated on your system from a database perspective. If you are a small shop, you'll have to do the research on your own. Be careful, though. Database administrators usually like to request the highest number of everything and might instruct you to double the amount of paging space as your RAM (the old rule of thumb). Generally speaking, if my system has greater than 4GB of RAM, I usually like to create a one-to-one ratio of paging space versus RAM. Monitor your system frequently after going live. If you see that you are never really approaching 50 percent of paging space utilization, don't add the space. A quick look at the recent Oracle for AIX documentation (see Resources) confirms this principle. It states that the recommended initial setting for paging space be half the size of RAM plus 4GB with an upper limit of 32GB. It recommends monitoring space with the lsps -a command and not to worry unless the utilization is over 25 percent on the system. Adding additional space that you won't use gives you absolutely nothing extra.

    I'm often asked how can you tell if a process is using paging space? Take a look at svmon, as shown in Listing 10.


    Listing 10. Using svmon
                    
    # svmon -P | grep -p 17602
    -------------------------------------------------------------------------------
         Pid Command          Inuse      Pin     Pgsp  Virtual 64-bit Mthrd LPage
       17602 sendmail         11877     3211        0    11691      N     N     N
    

    After identifying the PID number, using svmon can drill down to this level. This can help you determine whether or not tuning needs to be done to your application to either help stop the paging or to tune your operating system. Do a man on svmon, as there are many other purposes to this AIX memory-specific utility.

    Tuning with vmo

    In this section, I use vmo to tune paging parameters that can significantly reduce the amount of paging on your systems. I also discuss thresholds to change and parameters that can influence your overall scanning overhead.

    So what can you tune on VMM to cut down on paging? In the first installment of the series (see Resources) , I discussed the minperm and maxperm parameters in great detail, and I'll summarize some of the most important concepts here. Tuning vmo settings allows you to favor either working or persistent storage. You want it to favor working storage. The way to prevent AIX from paging working storage and to utilize the caching from your database would be to set maxperm to a high value (greater than 80) and to make sure the lru_file_repage=0 parameter indicates whether or not the VMM re-page counts should be considered and what type of memory it should steal. The default setting is 1, so you need to change it to 0. This is done using the vmo command. When you set the parameter to 0, it tells the VMM that you prefer that it steal only file pages rather than computational pages. This is what you want to do. You also need to set the minperm, maxperm, and maxclient parameters, as shown in Listing 11 below.


    Listing 11. Setting the minperm, maxperm and maxclient parameters
                    
    vmo -p -o minperm%=5
    vmo -p -o maxperm%=90
    vmo -p -o maxclient%=90
    

    In prior AIX versions, you would tune strict_maxperm and strict_maxclient from their default numbers. With AIX Version 5.3, changing the lru_file_repage parameter is a far more effective way of tuning, as you would prefer AIX file caching not be used at all. Now let's briefly summarize minfree and maxfree. If the number of pages on your free list falls below the minfree parameter, VMM starts to steal pages until the free list has at least the amount of pages in the maxfree parameter. The default settings in AIX Version 5.3 usually seem to work (see Listing 12).


    Listing 12. Default settings for maxfree and minfree
                    
    # vmo -a | grep free
                  maxfree = 1088
                  minfree = 960
    

    Let's discuss tuning page space thresholds. As stated earlier, when your paging space starts becoming very low, it starts to warn offending processes and then kills them. What thresholds can you change here to influence this activity? They would be npsware, npskill, and nokilluid. Npswarn is the threshold that is used to signal the processes when space is getting low. Npskill is the threshold where AIX starts killing processes. If your policy is early page space allocation, it will not kill the process. If you recall, I discussed earlier that this was the most reliable method of paging. Nokillid is an important threshold because, if this is set to 1, it makes certain that processes owned by root will not be killed, even when the npskill threshold is reached.

    Further, when a process cannot be forked because of a paging space issue, the scheduler retries to fork it again up to five times, delaying 10 clock ticks before each retry. You can change the schedo parameter to increase or decrease the amount of tries. The parameter used for this is the pacefork value. Another important parameter you can look at is lrubucket. Tuning this can reduce the scanning overhead. Because the page replacement algorithm is always looking for free frames while it is doing its scanning on systems with a lot of memory, the number of frames to scan can be significant. Increasing the value decreases the amount of buckets that need to be scanned. This can help performance. Listing 13 uses the vmo command with the -a option to display the values for lrubucket.


    Listing 13. Displaying the value for lrubucket
                    
    # vmo -a | grep lru
          lru_file_repage = 1
        lru_poll_interval = 0
                lrubucket = 131072 (this is in 4 KB frames)
    

    To increase the default value from 512MB to 1GB, use # vmo -o lrubucket=262144.

    And that's how you can significantly reduce paging on your AIX system using vmo.

    Summary

    Part 3 of this series looked at some of the tools that are available to you in capturing data for swap analysis. You used some system administration commands to display and configure swap on your system, and learned about paging and swapping and the various methods of paging that are available on AIX. You also reviewed some best practices when configuring paging space on your systems. Finally, you studied specific methods of tuning your VMM specific to handle paging and swapping. Parts 1 and 2 of this series went over the VMM in great detail and covered troubleshooting memory bottlenecks. You used various tools to help you monitor your systems for both short-term analysis and long-term trending. You also learned all about the general tuning methodology and the importance of monitoring systems prior to bottlenecks occurring. This enables you to establish a baseline while your system is healthy so that you can practice some of the methods discussed in this series, which include tuning your memory subsystems. Just make sure you test them on your development or test environments prior to deploying any changes to production.


    Resources

    Learn

번호 제목 글쓴이 날짜 조회 수
공지 [공지] 게시자료 열람자유. 불펌금지입니다. 조인상 2010.12.07 108386
151 AIX 6 VM관련 OS parameter secret 조인상 2010.08.26 1
150 AIX 6.1 aio 설정법 조인상 2010.07.06 24138
149 IBM x시리즈 드라이버 업데이트 팩 file 조인상 2010.07.01 15705
148 IBM p시리즈 ASM/시리얼접속방법 조인상 2010.07.01 30759
147 IBM xSeries 펌웨어 업데이트를 위한 BoMC(Bootable Media Center) 사용법 file 조인상 2010.06.29 31408
» Optimizing AIX 5L performance - AIX 5L시리즈 메모리 튜닝 조인상 2010.06.22 29268
145 ODM에 남아있는 Default Gateway 정보 삭제하기 조인상 2010.06.21 21101
144 Command is Respawning Too Rapidly. 3A30359F 조인상 2010.06.17 18516
143 pSeriese 온도 확인 방법 조인상 2010.06.17 20893
142 LPAR의 Memory Overhead (Hypervisor Memory) 사용량에 대하여 secret 조인상 2010.06.11 0
141 32KB 이상 파일 복사시 out of memory 에러 발생에 대한 복구(indirect segment 문제) 조인상 2010.06.10 19499
140 AIX에서 dump 강제로 받는 방법 file 조인상 2010.06.09 19284
139 AIX 환경에서 NFS port번호 range 지정방법 조인상 2010.06.04 37774
138 IBM 문서용 폰트 file 조인상 2010.06.04 16688
137 000-104 information secret 조인상 2010.06.02 1
136 신규시험 정보 Test 000-104: AIX 6.1 Administration 조인상 2010.06.02 24252
135 서버측HMC port ip확인하기 [3] 조인상 2010.05.14 27582
134 [매뉴얼] IBM p시리즈 머신에 레드햇리눅스 설치하기 file 조인상 2010.05.12 18231
133 BC & x시리즈 전력량 계산기 file 조인상 2010.05.11 17830
132 c 컴파일러 설치하기 조인상 2010.05.11 23188
서버에 요청 중입니다. 잠시만 기다려 주십시오...