원문 : http://www.ischo.net -- 조인상 //시스템 엔지니어

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

어플리케이션 설치 확인

# esxcli software vib list | grep Hewlett-Packard

hpssacli                       1.60.17.0-5.5.0.1198610                Hewlett-Packard  PartnerSupported  2014-07-10

HP SSACLI 설치

  - HP site 에서 HP Proliant Smart Array Controller Driver for VMware ESXi  를 다운로드 받아 아래의 커맨드로 설치한다.

 # esxicli software vib install -v /tmp/다운받은파일명.vib

커맨드 예제

* 어플리케이션 위치 /opt/hp/hpssacli/bin

Show configuration
# hpssacli ctrl all show config

Controller status
# hpssacli ctrl all show status

Show detailed controller information for all controllers
# hpssacli ctrl all show detail

Show detailed controller information for controller in slot 0
# hpssacli ctrl slot=0 show detail

Rescan for New Devices
# hpssacli rescan

Physical disk status
# hpssacli ctrl slot=0 pd all show status

Show detailed physical disk information
# hpssacli ctrl slot=0 pd all show detail

Logical disk status
# hpssacli ctrl slot=0 ld all show status

View Detailed Logical Drive Status
# hpssacli ctrl slot=0 ld 2 show

Create New RAID 0 Logical Drive
# hpssacli ctrl slot=0 create type=ld drives=1I:1:2 raid=0

Create New RAID 1 Logical Drive
# hpssacli ctrl slot=0 create type=ld drives=1I:1:1,1I:1:2 raid=1

Create New RAID 5 Logical Drive
# hpssacli ctrl slot=0 create type=ld drives=1I:1:1,1I:1:2,2I:1:6,2I:1:7,2I:1:8 raid=5

Delete Logical Drive
# hpssacli ctrl slot=0 ld 2 delete

Add New Physical Drive to Logical Volume
# hpssacli ctrl slot=0 ld 2 add drives=2I:1:6,2I:1:7

Add Spare Disks
# hpssacli ctrl slot=0 array all add spares=2I:1:6,2I:1:7

Enable Drive Write Cache
# hpssacli ctrl slot=0 modify dwc=enable

Disable Drive Write Cache
# hpssacli ctrl slot=0 modify dwc=disable

Erase Physical Drive
# hpssacli ctrl slot=0 pd 2I:1:6 modify erase

Turn on Blink Physical Disk LED
# hpssacli ctrl slot=0 ld 2 modify led=on

Turn off Blink Physical Disk LED
# hpssacli ctrl slot=0 ld 2 modify led=off

Modify smart array cache read and write ratio (cacheratio=readratio/writeratio)
# hpssacli ctrl slot=0 modify cacheratio=100/0

Enable smart array write cache when no battery is present (No-Battery Write Cache option)
# hpssacli ctrl slot=0 modify nbwc=enable

Disable smart array cache for certain Logical Volume
# hpssacli ctrl slot=0 logicaldrive 1 modify arrayaccelerator=disable

Enable smart array cache for certain Logical Volume
# hpssacli ctrl slot=0 logicaldrive 1 modify arrayaccelerator=enable

Enable SSD Smart Path
# hpssacli ctrl slot=0 array a modify ssdsmartpath=enable

Disable SSD Smart Path
# hpssacli ctrl slot=0 array a modify ssdsmartpath=disable