랜카드 동작속도 확인/수정 방법

2010.05.12 07:46

조인상 조회 수:29467

원문 : http://www.ischo.net -- 조인상 // 시스템 엔지니어

Writer : http://www.ischo.net -- ischo // System Engineer in Replubic Of Korea

+++++++++++++++++++++++++++++++++++++++++++++++++++++++

 

본문 : http://www.ischo.net -- 조인상 //시스템 엔지니어

+++++++++++++++++++++++++++++++++++++++++++++++++++++++


mii-tool 과 ethtool 유틸리티로 확인해 볼 수 있다.

사용방법은 ....

# mii-tool
[root@say ~]# mii-tool
eth0: negotiated 100baseTx-FD, link ok
SIOCGMIIPHY on 'eth1' failed: Operation not supported

# ethtool eth0
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 32
        Transceiver: internal
        Auto-negotiation: on
        Supports Wake-on: pumbg
        Wake-on: d
        Current message level: 0x00000007 (7)
        Link detected: yes




[root@say ~]# mii-tool --help
usage: mii-tool [-VvRrwl] [-A media,... | -F media] [interface ...]
      -V, --version              display version information
      -v, --verbose              more verbose output
      -R, --reset                reset MII to poweron state
      -r, --restart              restart autonegotiation
      -w, --watch                monitor for link status changes
      -l, --log                  with -w, write events to syslog
      -A, --advertise=media,...  advertise only specified media
      -F, --force=media          force specified media technology
media: 100baseT4, 100baseTx-FD, 100baseTx-HD, 10baseT-FD, 10baseT-HD,
      (to advertise both HD and FD) 100baseTx, 10baseT


[root@say ~]# ethtool
ethtool version 1.8
Usage:
        ethtool DEVNAME
        ethtool -a DEVNAME
        ethtool -A DEVNAME \
                [ autoneg on|off ] \
                [ rx on|off ] \
                [ tx on|off ]
        ethtool -c DEVNAME
        ethtool -C DEVNAME \
                [adaptive-rx on|off] \
                [adaptive-tx on|off] \
                [rx-usecs N] \
                [rx-frames N] \
                [rx-usecs-irq N] \
                [rx-frames-irq N] \
                [tx-usecs N] \
                [tx-frames N] \
                [tx-usecs-irq N] \
                [tx-frames-irq N] \
                [stats-block-usecs N] \
                [pkt-rate-low N] \
                [rx-usecs-low N] \
                [rx-frames-low N] \
                [tx-usecs-low N] \
                [tx-frames-low N] \
                [pkt-rate-high N] \
                [rx-usecs-high N] \
                [rx-frames-high N] \
                [tx-usecs-high N] \
                [tx-frames-high N] \
                [sample-interval N]
        ethtool -g DEVNAME
        ethtool -G DEVNAME \
                [ rx N ] \
                [ rx-mini N ] \
                [ rx-jumbo N ] \
                [ tx N ]
        ethtool -i DEVNAME
        ethtool -d DEVNAME
        ethtool -e DEVNAME \
                [ raw on|off ] \
                [ offset N ] \
                [ length N ]
        ethtool -E DEVNAME \
                [ magic N ] \
                [ offset N ] \
                [ value N ]
        ethtool -k DEVNAME
        ethtool -K DEVNAME \
                [ rx on|off ] \
                [ tx on|off ] \
                [ sg on|off ] \
                [ tso on|off ]
        ethtool -r DEVNAME
        ethtool -p DEVNAME [ %d ]
        ethtool -t DEVNAME [online|(offline)]
        ethtool -s DEVNAME \
                [ speed 10|100|1000 ] \
                [ duplex half|full ]    \
                [ port tp|aui|bnc|mii|fibre ] \
                [ autoneg on|off ] \
                [ phyad %d ] \
                [ xcvr internal|external ] \
                [ wol p|u|m|b|a|g|s|d... ] \
                [ sopass %x:%x:%x:%x:%x:%x ] \
                [ msglvl %d ]
        ethtool -S DEVNAME
번호 제목 글쓴이 날짜 조회 수
공지 [공지] 게시자료 열람자유. 불펌금지입니다. 조인상 2010.12.07 30736
104 리눅스에서 HBA카드의 WWN확인 방법 조인상 2010.05.12 54453
103 ssh 자동로그아웃 설정방법 조인상 2010.05.12 41513
102 LVM 사용하여 추가한 디스크로 볼륨 늘리기 ischo 2010.05.19 35789
101 리눅스 커널이 64bit 인지 확인방법 ischo 2012.02.24 34978
100 리눅스 가상 IP 설정 조인상 2010.05.12 30751
» 랜카드 동작속도 확인/수정 방법 조인상 2010.05.12 29467
98 Linux용 nmon 설치 및 구성 file ischo 2013.01.17 29131
97 리눅스에서 hostid 란? ischo 2013.06.25 29114
96 TCP TIME_WAIT이 많이 발생하여 문제가 되는 경우 ischo 2011.08.18 28326
95 RHEL 6.x 에서 multipath 설정 ischo 2015.07.31 27169
94 리눅스 mdadm 을 이용한 S/W RAID 구성 [1] ischo 2011.07.20 25432
93 static routing 정보 저장하여 재부팅시에도 자동 적용 ischo 2013.07.23 25317
92 삼바 세팅 및 사용법 [1] 조인상 2010.05.12 25115
91 백스페이스 눌러서 지우려고 할때 ^H 표시될때 조치법 조인상 2010.05.12 24508
90 아파치 SSL 적용된 경우 startup 시에 SSL 패스워드 자동입력시키기 ischo 2011.06.02 24244
89 file descriptor 설정하기 ischo 2013.07.10 24047
88 리눅스 Services 설명 ischo 2011.07.08 23634
87 ssh 접속시 로그인 속도가 느릴경우 속도 향상법 ischo 2011.08.30 22993
86 리눅스에서 디스크 덤프하기 ischo 2011.12.22 21866
85 리눅스에 Qlogic2300 HBA카드로 어레이 붙이기 file 조인상 2010.05.12 20195
서버에 요청 중입니다. 잠시만 기다려 주십시오...